Configuration variables for analog motor version 4:

CV1	Primary Adress
CV2	Vstart
CV3	Acceleration Rate
CV4	Deceleration Rate
CV5	Vmax
CV6	Vmid
CV17	Extended Adress Low Byte
CV18	Extended Adress High Byte
CV19	Consist Adress
CV29	0=DIR 1=14/28 2=PWRSRC 3=ADVACK 4=SPDTAB 5=LADRE 6= 7=ACCDEC (see below)
CV49	Output F1-F8 to GP2 (CV49-64)
CV50	Output F1-F8 to GP4
CV51	Output F1-F8 to GP5
CV55	2. Vmax switchable over F1-F8 or over drive direction
CV64	configuration byte (see below)
--------------------------------
DIRINV	CV29,0	direction inverted (+light)
FS28	CV29,1	14/28 speed step
LIINV	CV29,2	light inverted (PWRSRC never used)
STAB	CV29,4	speedtab / CV2,CV5&CV6
LADRE	CV29,5	long adress enable
ACKOFF	CV29,6	acknowledge off for piggy bag decoder, don't use this bit
--------------------------------
FLOFF	CV64,0	front light switch with cv50 (GP4)
RANGIER	CV64,0	low activ, mapped with FLOFF
BLOFF	CV64,1	back light switch with cv51 (GP5)
SPEED2	CV64,1	low activ, mapped with BLOFF
RDLTON	CV64,2	red light on (back light)
BRKON	CV64,3	brake light on
HI2LOFS	CV64,4	convert 126FS to 28FS with Vmin/Vmid/Vmax
FLACKON	CV64,5	flacker on
LITAUTO	CV64,6	firebox open/close automatically